Intellinet Network Solutions 562102 Manual Del Usuario página 2

The Intellinet Network Solutions 10-Port PoE+ Switch with 8 Fast Ethernet Ports and 2 FE Uplinks
passes both data and electrical power to PoE-compatible devices via standard Cat5e, Cat6 or
Cat6a network cables. Equipped with eight PoE+ ports, this switch can power wireless LAN
access points and bridges, VoIP phones, IP video cameras and more while delivering network
speeds up to 100 Mbps. This guide presents the basic steps to set up and operate this device.
For the user manual and specifications, visit intellinet-network.com. Register your product
at register.intellinet-network.com/r/562102 or scan the QR code on the cover.
Front Panel
LED Color
PWR
Green
Link/Act Green
PoE Orange
PoE Max Green
All ports on the switch support Auto-MDI/MDI-X functionality, so crossover cables
and uplink ports are not needed for connections to PCs, routers, other switches, etc.
Cat5e/6/6a UTP/STP cables provide optimal performance; if a status LED doesn't
indicate a link, check the corresponding device for proper setup and operation.
2
English
Status
On
Off
On
Flashing
Off
On
Flashing
Off
On The system has reached a total power output of 80%
Off
Slide Switch
Default: All ports can communicate with each other.
VLAN:
Ports 1 to 8 are isolated from each other while
allowing them to connect to ports 9 and 10.
PoE Extend:
Extend Ethernet connection up to 250 m (820 ft.)
*NOTE: Changing the mode automatically applies the corresponding
configuration without the need for a manual restart.
Operation
Power On
Power Off
Valid port connection at 10/100 Mbps
Sending or receiving data
No device is connected to the port.
The connected powered device is receiving power.
Abnormal power supply
No powered device (PD) is connected to the port.
The PoE total is nearing its maximum level
Instructions