Black and Decker BXKE2204E Instrucciones De Uso página 5

• Do not use the appliance if the supply cord or the plug is
damaged.
• Do not pull on the supply cord. Never use the supply cord
to lift up, carry or unplug the appliance.
• Do not wrap the supply cord around the appliance.
• Check the state of the supply cord. If it is damaged, it will
increase the risk of electric shock.
• If the appliance enclosure breaks, immediately disconnect
the appliance from the mains to prevent the possibility of
an electric shock.
• Do not use the appliance if it has been dropped, if there
are visible signs of damage or if it has a leak.
• Do not touch the plug with wet hands.
• The appliance must be used and placed on a flat, stable
surface.
• Do not place the appliance on hot surfaces, such as
cooking plates, gas burners, ovens or similar.
• Take care to avoid starting the appliance involuntarily.
• Do not leave the appliance out in the rain or exposed
to moisture. If water gets into the appliance, this will
increase the risk of electric shock.
USE AND CARE
• Do not switch the appliance on without water.
• Do not use the appliance if the on/off switch does not
work.
• Do not move the appliance while in use.
• Respect the MAX and MIN levels.
• Store this appliance out of reach of children and/or
persons with physical, sensory or reduced mental or lack
of experience and knowledge.
• Do not store the appliance if it is still hot.
• Only use water with the appliance.
• The appliance is only intended for heating water. As a
consequence, the appliance should not be used for the
cooking or heating of milk.
• The use of bottled mineral water adapted for human
consumption is recommended.
• Never leave the appliance unattended while in use.
• Never leave the appliance connected and unattended if
it is not in use. This saves energy and prolongs the life of
the appliance.
• Take care when handling recipients containing liquids
heated in this appliance, as they may boil fiercely.
• CAUTION: Water condensation may appear on the
surfaces and objects around this appliance.
DESCRIPTION
A Handle
B On/Off switch
C Base
D Supply cord housing
E Water level indicator
F Body
G Filter
H Lid
I Lid opening button
J Supply cord
If the model of your appliance does not have the
accessories described above, they can also be bought
separately from the Technical Assistance Service.
INSTRUCTIONS FOR USE
BEFORE USE
• Remove the appliance's protective film.
• Before using the product for the first time, boiling water to
remove all remaining dust and impurities is advisable.
FILLING WITH WATER
• You must fill the water compartment before turning on the
appliance.
• Open the lid by pressing the opening button.
• Fill the receptacle taking care to observe the MAX and
MIN levels.
• Close the lid.
• Put the container back in its place.
USE
• Take the length of the supply cord required out of the
housing.
• Attach the appliance to its base, making sure that it is
correctly fitted into place.
• Connect the appliance to the mains.
• Switch on the appliance using the on/off switch.
• Once the water has boiled, the appliance will switch off
automatically.
• The appliance can be switched on again using the switch
once the control device has cooled; if it is not switched on
again, do not force it; allow it to cool.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Unplug the appliance from the mains.
5