Descargar Imprimir esta página

Panasonic EP3203 Instrucciones De Uso página 16

Sillon de masaje para casa

Publicidad

Idiomas disponibles

Idiomas disponibles

ADJUSTING THE SEAT
Reclining the Massage Lounger
1. Hold down ■ until you reach the desired angle.
• Holding the button down will recline the seat and raise the legrest.
• Shortly after the backrest starts to recline the legrest will be raised.
• When both the backrest and legrest have been raised or lowered as far
as possible you will hear a "beep-beep-beep" sound.
• The backrest and legrest may reach their limits at different times.
• Adjust the position of the back cushion so that it does not come into
contact with your elbows.
2. Release GP when you have reached the desired
position.
• If you have reclined the back more than you want, press [3 to raise it
again.
• Do not recline the back too far when first using the unit as you may find
the massage to be too strong.
reclining
Approx. -5°
Raising the Backrest and Legrest
Hold down ® to raise the backrest and legrest
• When both the backrest and legrest have been raised as far as
possible you will hear a "beep-beep-beep" sound.
Raising and Lowering Only the Legrest
Raising the Legrest
Hold down 0 to raise the legrest.
• When the legrest has been raised as far as possible you will hear a
"beep-beep-beep" sound.
Lowering the Legrest
Hold down H to lower the legrest.
• When the legrest has been lowered as far as possible you will hear a
"beep-beep-beep" sound.
• Ensure that the legrest slide has been fully retracted before lowering
the legrest otherwise it will hit the floor (see below).
Extending the Legrest_
1. Slide the legrest out to the desired position by
2. Release the legrest lever,
pulling the legrest slide lever.
When you wish to retract the legrest, pull the legrest slide lever to
release the legrest. Raise your legs slightly to allow the springs to
retract the legrest.
Once you have released the legrest
slide lever the legrest will click into
place and lock.
14

Publicidad

loading

Este manual también es adecuado para:

Ep3202