Panasonic EP3203 Instrucciones De Uso página 19

Changing the Degree of Fatigue During the Program
• After pressing the button corresponding to the area you want to change and making any changes, press P* j.
• You can change the program even during mid-program by following the procedures on Pages 15 and 16.
(1) Press
(!ocationj
to select the area
you want to change.
(2) Press to input the degree
of fatigue.
(3) Press
L?.!5.J
after you have
finished making the desired
changes.
Additional Information-
The massage will be carried out in descending order from the greatest degree of fatigue.
• If the degree of fatigue selected is the same, the massage will be carried out in the
following order. Neck -> Shoulders -> Back -> Lower Back.
• If the degree of fatigue selected for any particular area is (BBS, then no massage
will be carried out in that area and the massage heads may merely pass over that
area on the way to the next selected area.
• If the degree of fatigue selected for the Neck to the Lower Back is HH no upper
body massage will be carried out.
• If the degree of fatigue selected for the Legs is
iM
, no air massage will be carried
out.
[![!■■"
1
III" 2
Dud^ 3
Dll" 4
III*- 5
— 3rd
— 1st
— No Massage
— 2nd
— Constantly
Massaged
Degree of Fatigue Settings are NOT Massage Strength Settings
• The movement and duration of the massage is determined by the unit based on the degree of fatigue selected.
• Use the Strength buttons to adjust the strength of the massage.
• Please note that in the Self Program massage strength for the legs cannot be set to 0.
• The focus button cannot be used in Self Program mode.
v_
J