TURNTABLE INSTALLATION
Cleaning the cooking compartment and putting the turntable in place.
For new installations, make sure all packaging and shipping tape has
been removed from the turntable shaft. Before using the appliance to
prepare food for the first time, you will need to put the turntable in
place correctly. You must clean the cooking compartment and
accessories.
1
2
Notes:
1. Never use the appliance without the turntable. Make sure that it is
properly engaged. The turntable can turn clockwise or anti-clockwise.
2. Never place the glass tray upside down. The glass tray should
never be restricted.
3. Both glass tray and turntable ring assembly must always be used
during cooking.
4. All food and containers of food are always placed on the glass tray
for cooking.
5. Never restrict the movement of the turntable.
6. If glass tray or turntable ring assembly cracks or breaks, contact
your nearest authorized service center.
How to put the turntable in place:
1. Place the turntable ring assembly ③
into the recess in the cooking
compartment.
2. Place the glass tray ① on the turntable
ring assembly ③. Fit the raised, curved
lines in the center of the glass tray
bottom between the three spokes of
the shaft. Make sure that the glass
tray ① engages in the turntable shaft
3
② in the centre of the cooking
compartment floor. The rollers on the
shaft should fit inside the turntable
bottom ridge.
13