07
INSTALLATION
COUNTERTOP INSTALLATION
Remove all packing material and accessories.
Examine the oven for any damage such as dents or broken door.
Do not install if oven is damaged.
Cabinet: Remove any protective film found on the microwave oven
cabinet surface.
Do not remove the waveguide cover that is attached to the oven
cavity to protect the magnetron.
1. Select a level surface that provide enough open space for the intake
and/or outlet vents.
0 cm
20 cm
MIN 85
cm
(1) The minimum installation height is 85cm.
(2) The rear surface of appliance shall be placed against a wall.
Leave a minimum clearance of 30cm above the oven, a
minimum clearance of 20cm is required between the oven
and any adjacent walls.
(3) Do not remove the legs from the bottom of the oven.
30 cm
20 cm
14