SAFETY INSTRUCTIONS
WARNING:
Besides following the instructions mentioned in
this manual, when using electric equipment you
must always observe all safety precautions to
prevent risk of fi re, electric shock and personal
injury.
Read this instruction manual before use and keep it
carefully.
The probability of risk can be reduced by the machine safety
equipment of the machines, as for example protections,
blade case, clamping, stoppage and the personal protection
devices as protective goggles, dust mask, ear plugs,
protective shoes and gloves. However, even the best
protection devices cannot protect you from the risks due to
lack of good sense and attention. Have always good sense
and observe the necessary precautions. Carry out only the
works that you consider safe. DO NOT FORGET: everyone
is responsible for his safety.
This tool has been designed for specifi c purposes. We
recommend you not to modify it or use it for purposes
different from the ones for which it has been manufactured.
If you have any doubts regarding specifi c applications, do
not use the machine before having contacted Femi and
received our instructions.
READ AND KEEP THIS MANUAL
12
GENERAL SAFETY INSTRUCTIONS
1.
Keep the work surface clean. If the work area or surface
is busy the probability of injuries is higher.
2.
Do not use the machine in dangerous environment
conditions. In order to prevent electric shock, do not
expose the machine to rain and do not use it in a damp
area. Keep the work area illuminated. Do not use the
machine near gas or infl ammable substances.
3.
Connect the dust collection device. If the machine is
equipped with a dust collection device, make sure that
this system is connected and correctly used.
4.
Keep unknown persons and children away from the
machine. All unknown persons and children must keep
a safe distance from the work area.
5.
Protect yourself from electric shock. Avoid any contact
with earthing surfaces.
6.
Handle the power supply cable with care. Do not pull the
electric cable to disconnect it from the plug. Keep the
electric cable away from heat, oil and sharp edges.
7.
Use extension cables designed for outdoor use. When
using the machine outdoors, use only extension cables
suitable for outdoor use, having specifi c indications.
8.
Be vigilant. Check carefully what you are doing, have
good sense. Do not use the machine if you are tired.
9.
Do not use the machine if you are have taken
medicines, alcohol, drugs.
10. Avoid accidental starts. Be sure that the switch is on
the OFF position before inserting the plug into the
socket.
11. Wear suitable clothing. Do not wear loose-sleeved
garments or pieces of jewellery which may get caught
in the moving parts. For outdoor use we recommend
non-slip shoes. If necessary, use headgear to cover
hair.
12. Use always personal protection devices: wear
protective goggles and masks in case dust or sawdust
is produced. Wear ear muffs or plugs in noisy areas.
Wear gloves when handling parts with sharp edges.
13. Do not be off balance over the machine. Always keep
fi rmly stand.
14. Ask for advices to skilled and qualifi ed people if you
are not familiar with using such a machine.
15. Remove the tools you do not use from the workbench.
If you do not use the tools, you must arrange them in
a dry area which is locked and away from the reach of
children.
16. Do not force the machine. You can obtain better and
safer results if you use the machine at the cutting
pressure for which it has been designed.
17. Use the suitable tool for the work you are processing.
Do not use a small tool for an intensive job. For
example, do not use a circular saw to cut branches or
stumps.
18. Block the piece. If possible, use C-clamps or a holder to
fi x the piece. It is safer than using only your hands.
19. Keep the tools in perfect conditions. Keep the tools
sharp and clean to obtain better and safer results.
Follow the instructions to grease and change the
accessories. Check regularly the electric cable and
change it if it is damaged. Keep the handles and the
handgrips dry, clean, unoiled and ungreased.