PUFF PFEN044 Manual De Instalación Y Mantenimiento página 25

6 • ELECTRICAL CONNECTIONS AND EQUIPOTENTIAL BONDING
6.5 • T h e o v e n m u s t a l s o b e b o n d e d
equipotentially to other equipment in
the kitchen. This connection is made by
wiring a conductor of nominal cross
section 10 mm
terminal at the back of the oven, which is
marked with the internationally recognized
symbol. All appliances in the room are
bonded in this way and connected to the
earth system of the building.
6.6 • The electrical safety of this appliance can
be guaranteed only when it is connected
correctly to an efficient earth system, in
compliance with current standards.
6.7 • If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard.
to the corresponding
2
90041240rev00
6.8 • As all ovens of the series are fitted with
an alternating fan motor (clockwise and
anticlockwise rotation), there is no need
for the fan to rotate in any particular
d i r e c t i o n .
commissioning the appliance, that the fan
is balanced and rotates freely.
EN - 25 -
S i m p l y v e r i f y , w h e n