Youin LUXOR Manual De Usuario página 4

Bike Assembly
Deploy the Product
1- Grab the seat and the handlebar. Rotate the front half of the frame forward around
the hinge until the front wheel is in the driving position.
2- Lift the locking lever (picture 1) to fully unfold the frame until you hear a click. Flip
the lever forward and close it so the frame is secured.
3- Turn the pedals to their horizontal position (picture 2).
4- Raise the handlebar to its vertical position and close its locking lever (picture 3).
5- Place the handlebar and the saddle at the desired height (picture 4 and 5).
Picture 1
Picture 4
Insert, unlock and remove the battery
1- Insert the key into the keyhole.
2- Turn the key to the OPEN position to unlock the
battery, now it can be removed (picture 6).
3- Press the battery into the hole to close it again so
you can turn on your e-bike.
4- In order to turn on your e-bike, the internal switch
of the battery must be in the ON position (picture 7).
4
YOUIN LUXOR
Picture 2
Picture 5
Picture 3
Picture 6
Picture 7