Be Cool BC121TU2201F Instrucciones De Uso página 162

With fans of this type and height, it is desirable that the unit is not rigidly
attached to the stand but sways somewhat.
This is therefore not a sign of insufficient quality of the product, but
serves as an anti-tipper if people or animals bump into the unit.
ASSEMBLY
Join the two components of the stand together
while pulling the cable through the middle.
Then press the two parts into each other, making
sure that they click into place.
Place the stand on the fan housing and carefully
pull the power cable through the opening in the
Unscrew the lock nut from the fan housing
34.
Feed the mains cable through the centre
hole of the two semi-circular bases.
35.
Insert the fan housing into the centre hole
of the two semi-circular bases and then press
these two semi-circular bases together; make
sure that the 4 holes between these two semi-
circles are tightly closed.
36.
Attach the base to the fan housing; insert
the locking nut and turn it clockwise to lock the
NOTE
Page 162 from 168
stand.
Basic installation:
counterclockwise
base in position