Be Cool BC18AC2301IKF Instrucciones De Uso página 179

Never switch off the air cooler by pulling the plug directly from the mains.
Always press the ON/OFF button to switch off and wait a few minutes
before disconnecting the unit from the mains. This allows the unit to run
through a cycle of checks to verify its functionality.
SWING
Use the "SWING" key to activate the swing function of the unit ➔ the
•
respective indicator lights up.
•
Press the button again to deactivate the function.
•
The horizontal alignment can be adjusted with the levers on the grille.
This function distributes the discharged air to the left and right. This way
you achieve a horizontal air distribution in the room.
SET SPEED
•
Use the "SPEED" button to set the speed of the fan.
•
The respective indicator on the display lights up:
1x press ➔ low speed ➔ "1" indicator lights up
2x press➔ medium speed ➔ "2" indicator lights up
Press 3x ➔ high speed ➔ "3" indicator lights up
4x press ➔ Turbo speed ➔ "4" indicator lights up
HUMIDITY CONTROL
•
Press the "
activate the humidity control.
•
As soon as the relative humidity reaches over 85%, the indicator "
lights up and the cooling mode is switched off while the fan is still
operating.
•
When the relative humidity is below 70%, the "
automatically switches the cooling mode back on.
NOTE
NOTE
" button on the control panel or on the remote control to
179
" button lights up and
"