Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
STEP 2 Leveling the refrigerator
CAUTION
• When installed, the refrigerator must be leveled on a flat, solid floor. Not leveling the
refrigerator can cause damage to the refrigerator or physical injury.
• Leveling must be performed with the refrigerator empty. Make sure no food items are
inside the refrigerator.
• For safety reasons, adjust the front a little higher than the rear.
Level the refrigerator using the special screws (levellers) on the front legs. Use a flat-head
screwdriver to turn the levellers.
NOTE
We recommend clearing more than a 2 inches (5 cm) gap from a wall to the rear and sides
of the product.
26
English
Untitled-6 26
• To adjust the height of the left side:
Insert a flat-head screwdriver into the
leveller of the left side front leg. Turn
the leveller clockwise to raise the left
side or turn it counterclockwise to lower.
• To adjust the height of the right side:
Insert a flat-head screwdriver into the
leveller of the right side front leg. Turn
the leveller clockwise to raise the right
side or turn it counterclockwise to lower.
2023-05-08
11:58:10
Publicidad
