LG LRSOS2706 Serie Manual Del Propietário página 21

en-us_main.book.book Page 21 Friday, February 10, 2023 11:43 AM
Water Filter
b
Replace the water filter when the Replace Filter icon turns on. After replacing the water filter, press and
hold the Water Filter button for three seconds to turn the icon light off. Replace the water filter
approximately every six months.
Freezer
c
Indicates the set temperature of the freezer compartment in Celsius (℃) or Fahrenheit (℉). The default
freezer temperature is 0 ℉ (-18 ℃). Press the Freezer button repeatedly to select a new set
temperature from - 7 ℉ to 5 ℉ (-23 ℃ to -15 ℃) or - 4 ℉ to 4 ℉.
†
Self Care
d
UV light is used to keep the water outlet clean. UV clean function runs automatically for 10 minutes
every hour or can be manually activated at any time.
Press and hold this button for 3 seconds to activate it manually.
NOTE
• During operation, the function stops if the Water button is pressed. It resumes automatically after 1
hour.
• The function runs automatically for 10 minutes every hour without requiring you to press the Self Care
button.
• UVnano is a compound word derived from the words UV and its unit, a nanometer.
†
Craft Ice
e
Press the Craft Ice button repeatedly to toggle between the 3 ICE, 6 ICE and OFF modes.
After 5 seconds of idle time, the last mode will be saved, and the display will return to normal.
• To turn off the Craft Ice maker, select the OFF mode.
• To turn on the Craft Ice maker, select the 3 ICE or 6 ICE mode.
NOTE
• For more ice, select the 6 ICE mode. For clearer ice, select the 3 ICE mode.
†
Wi-Fi
f
The Wi-Fi button, when used with the LG ThinQ app, allows the refrigerator to connect to a home Wi-Fi
network. Refer to Smart Functions for information on the initial setup of the application.
The Wi-Fi indicator shows the status of the refrigerator's network connection. The indicator illuminates
when the refrigerator is connected to the Wi-Fi network.
Press and hold the Wi-Fi button for 3 seconds to connect to the network. The indicator blinks while the
connection is being made and then turns on once the connection is successfully made.
†
Smart Grid
g
Press the Smart Grid button to turn the function On/Off. When the function is on, the indicator
illuminates. The function automatically turns on when the refrigerator is connected to the Wi-Fi
network. The Smart Grid function is only available if your electric utility company supports the function.
When the refrigerator is responding to a Demand Response (DR) message from the electric company,
the Grid On indicator illuminates.
Ice Plus
h
This function increases both ice making and freezing capabilities.
• Press the Ice Plus button to illuminate the indicator and activate the function for 24 hours. The
function automatically shuts off after 24 hours.
• Stop the function manually by pressing the button once more.
OPERATION 21