Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Remove the lowermost screws and hinges. Then remove the adjustable feet on both sides.
4.
Take the hinge pin out of the hinge bracket. Turn the bracket around and tighten the pin again.
5.
Attach the hinge bracket with a hinge pin on the other side of the freezer. Then install both
adjustable feet.
6.
Remove the rubber seal from the door, turn it over, and replace it.
7.
Carefully set the door back into place. Ensure the door is aligned horizontally and vertically so that
the seals are closed on all sides before finally tightening the top hinge.
8
40
DO1056DV
Publicidad
