Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE:
Make sure the filter is securely locked. Otherwise, it would loosen and cause
danger.
When activated carbon filter attached, the suction power will be lowered.
BULB REPLACEMENT
Important :
Note:
Before changing the lights, make sure that the appliance is turned off and
unplugged.
Protect against danger when changing lights, such as wearing gloves.
Changing the light
2. Remove the decorative board and aluminum mesh, remove the two screws of the
fixed lamp board with a screwdriver.
3.
Unscrew the 4pcs screws on the LED light strip bracket by cross screwdriver,
dismantle the LED light strip and pull out the terminal of the light connecting wire.
4.
Apply the reverse procedure to install the light strip back.
• ILCOS D code for this lamp is: DSL-5-S-450
– LED modules –LED lamp strip
– Max wattage: 1×5 W
– Voltage range: DC 12V
– Dimensions: 450mm
The bulb must be replaced by the manufacturer, its service
agent or similarly qualified persons.
Always switch off the electricity supply before carrying out
any operations on the appliance. When handling bulb, make
sure it has completely cooled down before any direct contact
with hands.
When handling bulbs hold with a cloth or gloves to ensure
perspiration does not come in contact with the bulb as this
can reduce the life of the bulb.
24
Publicidad
