Levenhuk MAGUS CHD10 Guia Del Usuario página 6

CAMERA CONTROL PANEL
6
FUNCTION FUNCTION DESCRIPTION
Snap Captures the image and saves it to the SD card.
Record Records a video and saves it to the SD card.
Automatically adjusts the exposure time and gain according to
Auto Exposure
the exposure compensation value.
Available when Auto Exposure is selected. Adjusts the exposure
Exposure
compensation according to the current video brightness to achieve
Compensation
the proper brightness value.
Available when Auto Exposure is not selected. Adjusts the time of
Exposure Time
exposure and thus adjusts the brightness of the video.
Adjusts the brightness of the video. The Noise will be adjusted
Gain
accordingly.
Red Adjusts the proportion of the red color in RGB in the video.
Green Adjusts the proportion of the green color in RGB in the video.
Blue Adjusts the proportion of the blue color in RGB in the video.
Auto White Balance Adjusts the White Balance of the video continuously.
Adjusts the Red color or Blue color parameters to set the White Balance
of the video. White balance is adjusted to obtain a natural ratio of cold
Manual White Balance
and warm colors on the image with regard to the light source type. Move
the corresponding sliders to adjust the values.
Adjusts the white balance of the Region of Interest when the Region of
ROI White Balance
Interest content is changed.
Sharpness Adjusts the Sharpness level of the video.
Denoise Removes the noise from the video.
Saturation Adjusts the Saturation level of the video.
Allows you to adjust the midtone values of the image. The higher the
Gamma
Gamma value is, the darker the image will be.
Contrast Adjusts the Contrast level of the video.
DC (Direct current) Allows you to use a light source without light flickering.
AC(50HZ)
Eliminates light flickering when a 50Hz light source is used.
(Alternative current)
AC(60HZ)
Eliminates light flickering when a 60Hz light source is used.
(Alternative current)
Default Restores the default settings.