Levenhuk MAGUS CHD10 Guia Del Usuario página 8

Select a figure to draw up; click at the desired initial point on the image, click at the desired end point. The selected
figure will be drawn up on the image and the figure parameters will be displayed.
CAM E RA C ON T RO L TO O L BAR
To open the Camera Control Toolbar, move the mouse cursor to the bottom of the window. The control toolbar will
automatically pop up.
ICON
SE TTI N GS
8
Executes Calibration with the help
of a micrometer to determine the
corresponding relation between
magnification and resolution as well
as between the measurement unit and
the sensor pixel size.
Exports the Measurement information
to CSV file(*.csv)
FUNCTION
Zoom In the Video Window
Horizontal Flip
Color/Gray
Display Cross Line
Settings
ICON FUNCTION
Zoom Out the Video Window
Vertical Flip
Video Freeze
Browses the images and videos on the SD Card
Check the Version of MAGUSView
Exits from Measurement mode
Use these icons to select Move
Left, Move Right, Move Up, Move
Down, Color Adjustment, or Delete.