Tineco FLOOR ONE S5 Serie Manual De Uso página 24

15 Deodorizing & Cleaning Solution
16 Cleaning Tool
17 Dry Filter & Holder
18 Accessory Holder
19 Adaptor
20 Charging Dock
21 DWT Full or Blocked
22 SUCTION Mode
23 AUTO Mode
24 CWT Empty
25 Brush Roller Tangled Indicator
26 Power Indicator
27 Tineco Logo
28 Self-cleaning Icon
29 Battery Level Indicator
Fig.A
ASSEMBLY
How to Assemble/Disassemble
Note:
For water tank and brush assembly, please refer
to "Operation" and "Maintenance".
• To assemble the handle, insert it into the
appliance until you hear a click.
Fig.B-1
• In the event that the handle need to be
disassembled, press the spring to release the
handle with a tool (like a screwdriver) and lift
the released handle from the appliance.
Fig.B-2
Tips:
Mute/Language Switch Button
• Press to turn on/off the voice prompt.
• Press twice to switch languages. (More voice
languages will be added, please refer to the
actual product for now.)
*Only available in selected models.
Fig.B-2
OPERATION
Preparing for Use
• Before first use, please charge the appliance
for 4-5 hours (refer to "Charging Instructions"
for details).
* Based on results from Tineco lab tests. Lab
temperature 39.2°F (4°C) ~ 104°F (40°C).
1.Press the button and the appliance will start
in AUTO mode by default. Press it again to
turn off the appliance. Switch between AUTO,
MAX and SUCTION modes by pressing the
button.
Fig.C-1
Tips (SUCTION mode not available):
• Solution mode/ Water Only mode:
Appliance starts with Solution mode by default.
Power on while the appliance is upright, hold
for 3s to switch between the two modes.
• Switch to Water Only mode:
LED Loop: Red → Blue (use water only)
• Switch to Solution mode:
LED Loop: Blue → Red (use cleaning solution)
2.The appliance will stop working when put
upright and start running again when reclined.
* Do not recline more than 142° to avoid water
leakage.
Fig.C-2
3.Place the appliance on the charging dock
vertically after use for recharge and storage.
Fig.C-3
Note:
• It is crucial to choose the right mode based on
the CWT contents to achieve the highest level
of dirt detection efficiency.
• Do not vacuum foamed liquid.
• To vacuum water left on the surface, the
appliance will keep running for 3 seconds after
power off.
• Suction mode is only available in selected
models, please refer to the actual product.
Filling Clean Water Tank
22