Tineco FLOOR ONE S3 Serie Manual De Uso página 24

15 Brush Roller Cover
16 Brush Roller
17 Deodorizing & Cleaning Solution
18 Cleaning Tool
19 Dry Filter & Holder
20 Accessory Holder
21 Adaptor
22 Charging Dock
23 Self-cleaning Icon
24 Brush Roller Tangled Indicator
Dirt Monitoring Loop
25
(Blue to red according to the dirt amount)
26 AUTO Mode
27 DWT Full or Blocked
28 CWT Empty
29 Power Indicator
30 Tineco Logo
31 Battery Level Indicator
Fig.A
ASSEMBLY
How to Assemble/Disassemble
Note:
For water tank and brush assembly, please refer
to "Operation" and "Maintenance".
• To assemble the handle, insert it into the
appliance until you hear a click.
Fig.B-1
• In the event that the handle need to be
disassembled, press the spring to release the
handle with a tool (like a screwdriver) and lift
the released handle from the appliance.
Fig.B-2
OPERATION
Preparing for Use
• Before first use, please charge the appliance
for 4-5 hours (refer to "Charging Instructions"
for details).
* Based on results from Tineco lab tests. Lab
temperature 39.2°F (4°C) ~ 104°F (40°C).
1.Press the button and the appliance will
start in AUTO mode by default. Press it again
to turn off the appliance. Switch between
AUTO, MAX and SUCTION modes by pressing
the button.
Fig.C-1
Tips (SUCTION mode not available):
• Solution mode/ Water Only mode:
Appliance starts with Solution mode by default.
Power on while the appliance is upright, hlod
for 3s to switch between the two modes.
• Switch to Water Only mode:
LED Loop: Red → Blue (use water only)
• Switch to Solution mode:
LED Loop: Blue → Red (use cleaning solution)
2.The appliance will stop working when put
upright and start running again when reclined.
* Do not recline more than 142° to avoid water
leakage.
Fig.C-2
3.Place the appliance on the charging dock
vertically after use for recharge and storage.
Fig.C-3
Note:
• It is crucial to choose the right mode based on
the CWT contents to achieve the highest level
of dirt detection efficiency.
• Do not vacuum foamed liquid.
• To vacuum water left on the surface, the
appliance will keep running for 3 seconds after
power off.
• Suction mode is only available in selected
models, please refer to the actual product.
22