Technical Description - Waeco PowerVac PV100 Instrucciones De Uso

PV-100.book Seite 23 Freitag, 2. Dezember 2005 4:53 16
PowerVac PV100
5

Technical description

5.1 Operating description
The PowerVac PV-100 can be used as a dry and wet vacuum cleaner.
The battery permits operation if no electrical socket is available.
It takes about 8 to 10 hours to recharge the vacuum cleaner. The integrated
charging electronics automatically completes the charging process.
The vacuuming capacity is approximately 90 W and thus well suited for
even stubborn dirt. The battery can be charged from 230 V AC mains as
well as from your vehicle's on-board 12 V supply.
The vacuum cleaner comes with a dirt canister with a capacity of 3.8 l and a
reusable cloth bag. Both may be easily removed, emptied and cleaned.
5.2 Parts
Nº in 2,
Name
page 3
1 Handle
2 On/off switch
3 Charge gauge
4 Locking key
5 Dirt canister
6 Clip
7 Battery compartment
8 Charge socket
5.3 Gauges
The charge gauge (2 3, page 3) indicates that battery is charging.
Technical description
23