SALKI 83002056 Manual De Instrucciones página 43

Before starting to use a inflator, always use a manometer to check the current tyre
pressure.
Check this air pressure when the tyre is "cold". Do not use the inflator when the car engine
is running.
1. Remove the valve cover.
2. Depending on the item to be inflated, secure the universal adaptor directly onto the
item or appropriate inflating accessory. Car tyres do not require the use of an accessory.
3. When using without an accessory, simply push down the adapter onto the threaded
part of the valve on the rim with the lever in a vertical position and secure in place by
pushing the lever down. If you are using an accessory, secure the universal adapter
accessory in the same way.
4. Plug in and switch on the inflator (ON / OFF switch to the "ON" position). Inflation will
begin immediately. Switch off the product when the desired pressure is reached. Pressure
levels should always be checked with the inflator switched off. If the desired pressure has
not been reached, repeat the procedure.
5. If the tyre is completely deflated, it may have come away from the rim. This might mean
that air escapes when trying to inflate it. In this case, you will need to lift the car before
inflating the tyre.
6. The time required to inflate a tyre will depend on the specific tyre in question and how
deflated it is.
1
GARAGE INFLATOR
2
1. Move the lever to a horizontal position.
2. Place the connector over the threaded part of the
valve.
43
WARNING
INFLATING TYRES