Publicidad
Idiomas disponibles
Idiomas disponibles
ELECTRICAL REQUIREMENTS
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
Voltage: 120 V~
Frequency: 60 Hz
Power: 180 W
NOTE: If the plug does not fit in the outlet, contact a qualified electrician. Do not modify the
plug in any way. Do not use an adapter.
Do not use an extension cord. If the power supply cord is too short, have a qualified electrician
or service technician to install an outlet near the appliance.
The cord should be arranged so that it will not drape over the countertop or tabletop where it
can be pulled on by children or tripped over unintentionally.
ASSEMBLING THE BLENDING ARM
Before first use, clean all parts (see "Care and Cleaning" section).
IMPORTANT: Always unplug the Hand Blender, before attaching or removing parts.
1.
Insert the Blending Arm into the Motor Body and twist until it clicks to lock in place.
2.
If using a Pan Guard, place it on a flat surface. To insert the Pan Guard, angle the
Blending Arm to one side of the Mounting Clip. Then, gently pull the other Mounting Clip
outward and push down the Blending Arm. Ensure the Mounting Clips are secured into
place.
NOTE: U.S. patented removable Pan Guard to help protect your cookware.
PRODUCT USAGE
USING THE BLENDING ARM
Use for smoothies, milkshakes, soup, cooked vegetables, frosting, or baby food, etc.
1.
Plug the Hand Blender into an electrical outlet.
2.
Insert the Hand Blender into the mixture. Press the Variable Speed Controller to start.
Use your free hand to cover the top of the Blending Pitcher for better stability and avoid
splashing.
NOTE: Do not immerse Motor Body into liquids or other mixtures.
3.
Use the draw up motion with the Hand Blender to move the ingredients within the Pitcher.
Slowly draw it upwards against the side of the Pitcher. Repeat the process until the
ingredients are at the desired consistency.
4.
With your wrist, make a circular motion to draw the Hand Blender up slightly and let it
blend again into the ingredients.
5.
Release the Variable Speed Controller to stop; then remove Hand Blender from mixture.
Unplug the Hand Blender before removing or attaching the parts.
WARNING
Electrical Shock Hazard
5
Publicidad
