CLEAN AND MAINTENANCE
Disconnect the power supply before cleaning and maintenance.
In order to ensure the life of the machine, it should be thoroughly cleaned frequently.
cleaning method 1
1.
After cooking is complete, wait for the oven to cool down completely.
Remove oven accessories, rinse with warm water and dry.
2.
Use a hot rag to clean food residue or grease from the oven.
3.
4.
Clean the oven surface with a soft cloth dampened with detergent and dry.
cleaning method 2
1.
After cooking, wait for the oven to cool completely.
Remove oven accessories, rinse with warm water and dry.
2.
Remove food residues and oil stains from the oevn cavity.
3.
Clean the oven surface with a soft cloth dampened with detergent and dry.
4.
Start the water clean function as follows:
5.
1). Add about
250 ml
the cavity and stir well.
2). With the oven door closed, turn Knob
3). Turn knob
K2
4). Select dur mode and set the time to
5).
Press the "
After the water clean function is completed, wait for the oven to cool completely.
6.
Then dry the furnace oven cavity with clean absorbent sponge or soft cloth.
Notes
1.
Do not use sharp cleaning tools, hard brush and corrosive cleaning products, so as
not to damage the oven and its accessories.
2.
Do not use rough scrubbing agent or sharp metal spatula to clean the door glass.
of purified water and an appropriate amount of dish soap to
to the "100°C" position.
" key to start.
K1
to the "
" position.
30
minutes.
EN-14