Resol FAP13 Instrucciones página 6

RESOL FAP13
Outdoor temperature sensor
Safety advice
Please pay attention to the following
safety advice in order to avoid danger
and damage to people and property.
Appropriate usage
This product is an outdoor tempe-
rature sensor and is to be used in
compliance with the technical data
specified in these instructions.
Improper use excludes all liability
claims
Technical data
Material:
Lower part of housing: Karilen E42D-H201
Upper part of housing: Luran S757R
Dimensions: 111 x 68 x 40 mm
Sensor: Pt1000
Order note
RESOL FAP13 Article-No.: 15500810
6
|
Table of contents
Safety advice ............................................................................................. 2
Technical data and overview ................................................................... 2
1. Mounting ............................................................................................. 3
2. Electrical connection............................................................................................4
Imprint ................................................................................................... 4
Subject to change. Errors excepted.
The FAP13 is used for measuring the outdoor temperature
using platinum measurement elements. According to
weather conditions, the FAP13 has a housing with
outstanding design and which is protected against dripping
water. It is suitable for mounting outdoors. Glands for the
sensor cables at the bottom of the connecting box allow
easy installation.
CE-Declaration of conformity
The product complies with the relevant directives and
is therefore labelled with the CE mark. The Declaration
of Conformity is available upon request, please contact
RESOL.
EN