Anhang; Annex; Annexe; Anexo - Eneo VCQ-6057 Instrucciones De Manejo

Anhang / Annex / Annexe / Anexo
BYTE 1: Status code for normal operation modes
b7 b6
LOCK VCR
BYTE 2: Status code for alarm operations: The first 4 bits show the sensor activated alarm status of each channel; next 4 bits show the video loss alarm
status of each channel. The digit „1" means alarm event is detected, and „0" means no alarm event is detected,
b7 - b4: Sensor Activated Alarm
b7 b6
CH4 CH3
Sensor activated Alarm
0001 = CH1 activated
0010 = CH2 activated
0100 = CH3 activated
1000 = CH4 activated
b5 b4
SEQU QUAD
Auto-sequencing mode
0 = Auto sequencing mode
1 = Quad or full screen mode
VCR mode
0 = VCR operation
1 = Live operation
Security Lock mode
0 = Security lock ON mode
1 = Security lock OFF mode
Menu Setup mode
00 = Menu setup mode
b3 - b0: Video Loss Alarm
b5 b4
CH2 CH1
35
b3 b2
CH4 CH3
Display Mode
0 = Quad screen display
1 = Full screen display
b3 b2
CH4 CH3
Video Loss Alarm
0001 = CH1 activated
0010 = CH2 activated
0100 = CH3 activated
1000 = CH4 activated
b1 b0
CH2 CH1
Channel Select
1110 = CH1
1101 = CH2
1011 = CH3
0111 = CH4
b1 b0
CH2 CH1