Publicidad
STEP 7
F
G
1.
Screw 6 cam bolts (A) into cam bolt holes on top board (1).
2.
Attach 2 adjustable anchor brackets (G) to top board (1) by inserting 2 screws (F) through
holes on adjustable anchor brackets (G), then tighten to top board (1).
STEP 8
1.
Slide upper back board (8) into grooves on left side panel (2), right side panel (3) and shelf (5).
2.
Attach top board (1) to left side panel (2), right side panel (3), divider board (4) and upper
back board (8) by inserting cam bolts (A) into cam lock holes on left side panel (2), right side
panel (3) and divider board (4). Make sure upper back board slides into groove on top board (1).
3.
Insert 6 cam locks (B) into cam lock holes on left side panel (2), right side panel (3) and
divider board (4), then rotate clockwise to secure cam bolts (A) in place.
F
A
G
A
1
8
B
B
4
2
F
A
G
A
1
B B
B
B
3
5
A
A
Publicidad
