Publicidad
Idiomas disponibles
Idiomas disponibles
5....-05-HDR 2834
GB
Remove the motor device and the accessories from the box. Also remove any
packaging materials that may be present.
High-Pressure Hose (7)
Use the high-pressure hose (7) to connect the high-pressure outlet (2) of the clea-
ner and the connection to the manual spray gun (8). Please use a size 17 spanner
to help you.
Accessories
Depending on requirements, screw the jet pipe (5) or the detergent container on to
the manual spray gun (8).
The detergent container consists of three components.
1. The thread connection - for connecting to the manual spray gun (8).
2. The quick-acting closure with nozzle. Press and twist this simultaneously to
separate it from the thread connection.
3. The container. After this has been filled it is screw on to the quick-acting closu-
re.
Electrical connection
Only connect the machine to a properly installed safety socket, 230 V/50 Hz. Before
inserting the mains lead into the socket, check whether the voltage you intend to
use complies with that of the machine.
Extension Leads
Only extension leads that are protected against water spray should be used with
high mechanical strength and an internal diameter of at least 3 x 1.5 mm
Water Connection
The high-pressure cleaner is suitable for connection to a standard domestic water
supply. Please observe the regulations of your water supply company.
The supply hose (not supplied) should have the following dimensions:
Length:
For the connection values please see the technical data contained in these instruc-
tions.
56
08.12.2003
Assembly
Connection Requirements
min 7,5 m
9:39 Uhr
Seite 56
Diameter:
min. 1/2"
2
.
Publicidad
