Publicidad
Idiomas disponibles
Idiomas disponibles
1. Locate the factory amp (†), unplug all connectors, then remove the amp.
2. Install the AXDSPX-GMM50 harness and make all necessary connections, but leave the amp
turn-on wire disconnected.
3. Plug the 8-pin and 16-pin connectors from the AXDSPX-GMM50 harness into the
AXDSPX-GMM50 interface.
4. Download and install the AX-DSP-XL app from the Google Play Store or Apple App Store.
5. Open the app and follow the instructions on the Bluetooth Connection tab to pair the
mobile device to the AXDSPX-GMM50. (Figure A)
6. Scroll to the Configuration tab then select the vehicle type. Press the Lock Down button to
save the configuration. (Figure B)
7. Connect the amp turn-on wire from the AXDSPX-GMM50 harness.
8. Click the Identify button to confirm that the AXDSPX-GMM50 is connected properly. If so,
a chime will be heard from the front left speaker or gauge cluster. Test all functions of the
installation for proper operation.
9. Adjust the DSP settings in the app as desired. Refer to the instructions under the Setup
Instructions tab, or online at
Axxessinterfaces.com
4
INSTALLATION
for an explanation of each tab in the app.
(Figure A)
(Figure B)
Publicidad
