Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Installation instructions for AX-MLINK-HD
Car audio Wi-Fi A/V mirror interface through HDMI
With this Wi-Fi interface you will be able to mirror your IOS or Android device on your aftermarket in-dash
mobile video screen.
Note: This will not allow the mobile device to be operated from the aftermarket screen. All operations
(button presses) will need to be executed from the mobile device.
Mirroring capabilities are determined by the smart devices' (phone, tablet, etc.) software and the network
provider's permissions given to the device. Software updates can change the devices ability to mirror
certain types of video/audio.
• Wi-Fi mirror interface
• Cable to Car Audio (power connection)
1. Power LED: Blue light on when power on.
2. Antenna connector: Connect external
Wi-Fi antenna.
3. Reset:
(a) Press 1 second for reset.
(b) Press 5 seconds for factory
default settings.
4. Mode/Upgrade:
(a) Press once for switching between IOS Air
Play system and Android Miracast system.
METRA. The World's best kits.™
All manuals and user guides at all-guides.com
AX-MLINK-HD
Interface components
• Wi-Fi antenna
Interface DescrIptIon
(b) Press 5 seconds for upgrading software.
5. USB: Charge (5-volts 1-amp)/software upgrade.
6. Power/AV-IN: Power cable connections
to car audio ACC/GND.
7. HDMI port: Output to radio (HDMI cable
s old separately).
1-800-221-0932
Installation to the aftermarket radio:
• Connect the Red wire to the accessory wire.
Note: It is suggested to add a 3A fuse in-line with
the accessory wire.
• Connect the Black wire to the ground wire.
• Connect an HDMI cable (not supplied), to the the
HDMI port in the AX-MLINK-HD.
Note: Make sure to place the interface in an area
you can easily access it in case the "Mode" needs
to be changed from IOS to Android, or vice versa.
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
WIrInG tHe aX-mLInK-HD
(continued on next page)
Publicidad
Tabla de contenido
Manuales relacionados para Axxess AX-MLINK-HD
Resumen de contenidos para Axxess AX-MLINK-HD
- Página 1 All manuals and user guides at all-guides.com Installation instructions for AX-MLINK-HD AX-MLINK-HD WIrInG tHe aX-mLInK-HD Car audio Wi-Fi A/V mirror interface through HDMI Installation to the aftermarket radio: • Connect the Red wire to the accessory wire. With this Wi-Fi interface you will be able to mirror your IOS or Android device on your aftermarket in-dash mobile video screen. Note: It is suggested to add a 3A fuse in-line with Note: This will not allow the mobile device to be operated from the aftermarket screen.
- Página 2 All manuals and user guides at all-guides.com AX-MLINK-HD How to link 2. On your IOS device, double-click the Home button to display your recently On the aftermarket in-dash mobile video screen: used apps. • Have the device in the HDMI IN source; depending on the brand of screen you have, this may be labeled differently. 3. Swipe the recently used apps twice from left to right until you see the AirPlay icon. Tap the AirPlay icon to display a list of available AirPlay devices. IOS SyStEM • If you do not see the AirPlay icon, your device may not be connected successfully.
-
Página 3: Technical Specification
All manuals and user guides at all-guides.com AX-MLINK-HD How to link WI-fI MIRAcASt SUPPORt DEVIcES Important notes: 1. This product does not require a network: IOS mode, to use AirPlay Mirroring, you need the following devices: • The Wi-Fi A/V mirror interface uses a Wi-Fi direct connection and does not iPhone 4s or later require a network connection to your mobile device. IOS 6 & up iPad 2 or later 2. Screen time out setting: iPad mini or later • If the screen time out setting is enabled on your phone and your phone... -
Página 4: Important Warning
All manuals and user guides at all-guides.com Installation instructions for AX-MLINK-HD IMPORtANt WARNING This product includes instructions for installation which must be carefully followed. The instructions are worded in such a manner to assume that the installer is capable of completing these type of electronic installations. If you are unclear as to what you are instructed to do or believe that you do not understand the instructions so as to properly and safely complete the installation you should consult a technician who does have this knowledge and understanding. failure to follow these instructions carefully and to install the interface as described could cause harm to the vehicle or to safety systems on the vehicle. -
Página 5: Interfase De Duplicación De A/V Wi-Fi Del Audio Del Vehículo A Través De Hdmi
All manuals and user guides at all-guides.com Instrucciones de instalación para AX-MLINK-HD AX-MLINK-HD ConeXión del aX-mlinK-Hd Interfase de duplicación de A/V Wi-Fi Instalación del radio de mercado secundario: del audio del vehículo a través de HDMI • Conecte el cable rojo con el cable de accesorios. Nota: Se sugiere que se añada un fusible 3A en Con esta interfase Wi-Fi, podrá duplicar su dispositivo iOS o Android en su pantalla de video móvil de... - Página 6 All manuals and user guides at all-guides.com AX-MLINK-HD Cómo vincular En la pantalla móvil en el tablero de mercado secundario: 2. En su dispositivo iOS, haga doble clic en el botón Inicio para mostrar sus aplicaciones utilizadas recientemente. • Ponga el dispositivo en la entrada HDMI IN; dependiendo de la marca de pantalla que tenga, los nombres pueden ser diferentes. 3. Deslice las aplicaciones utilizadas recientemente de izquierda a derecha hasta que vea el icono de AirPlay. Toque el icono de AirPlay para mostrar una lista de dispositivos AirPlay disponibles. SIStEMA IOS • Si no ve el icono AirPlay, su dispositivo puede no estar En la interfase: conectado correctamente.
- Página 7 All manuals and user guides at all-guides.com AX-MLINK-HD Cómo vincular DISPOSItIVOS DE SOPORtE WI-FI MIRACASt Notas importantes: 1. Este producto no requiere red: Modo iOS, para usar la duplicación de pantalla con AirPlay, necesita • La interfase de duplicación Wi-Fi A/V utiliza una conexión directa Wi-Fi y no los siguientes dispositivos: requiere de una conexión de red en su dispositivo móvil. iOS 6 y más iPhone 4s o posterior 2.
-
Página 8: Advertencia Importante
All manuals and user guides at all-guides.com Instrucciones de instalación para AX-MLINK-HD ADVERtENCIA IMPORtANtE Este producto incluye instrucciones de instalación que deben seguirse cuidadosamente. Dichas instrucciones están redactadas dando por supuesto que el instalador es capaz de completar estos tipos de instalaciones electrónicas. Si tiene dudas respecto de lo que se le indica que haga o cree que no comprende las instrucciones como para completar la instalación en forma adecuada y segura, debe consultar a un técnico que efectivamente tenga estos conocimientos y comprensión. Si no sigue estas instrucciones con cuidado y no instala la interfaz como se describe, podría provocar daños en el vehículo o en los sistemas de seguridad del...