Descargar Imprimir esta página

VARO POWERPLUS POWXG50200 Traduccion Del Manual De Instrucciones Originale página 39

Desbrozadora 31cm3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 68
BRUSH CUTTER 31CC
POWXG50200
1 INTENDED USE
Depending on the assembled cutting tools, the bush cutter can be used to mow lawns or
meadows, and to trim scrub, shrubs, bushes and very small trees. It is for private use. The
device cannot be used for other purposes. Not suitable for professional use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 OVERVIEW COMPONENTS (FIG. A+B)
1.
Fuel filler cap
2.
Primer bulb
3.
Air filter
4.
Spark plug
5.
Exhaust
6.
Oil filler cap
7.
Recoil starter handle
8.
Cutting blade
9.
Safety guard
3 PACKAGE CONTENT LIST
Remove all packing materials.
Remove remaining packaging and transit supports (if existing).
Check the completeness of the packing content.
Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
1 x brush cutter 31 cc
1 x manual
1 x cutting head
1 x measure cup
1 x plastic safety guard
1 x shoulder strap
1 x spark plug wrench
1 x hex key
1 x left handle
When parts are missing or damaged, please contact your dealer.
Copyright © 2024 VARO
POWXG50200
10. Handle bar mount
11. Left & right handle
12. Throttle lockout
13. Throttle trigger
14. On/off switch
15. Harness hook
16. Choke button
17. Harness
18. Shaft
P a g e
| 2
EN
www.varo.com

Publicidad

loading