Publicidad
Idiomas disponibles
Idiomas disponibles
ENG
USEFUL TIPS FOR CUTTING
• Wash the hair as usual, dry and brush it in the direction of growth to untangle
any knots.
• After drying, do not use hairspray, mousse or gel.
• For best results, use the appliance against the direction of hair growth.
• If hair starts to clog the adjustable guide comb, remove the comb from the
• appliance and clean away the hair (blow and/or brush it out).
Turn off the appliance before changing or inserting any accessories.
When using the appliance without the adjustable guide comb G (fig.1),
the blade of the head A (fig.1) will cut the hair very close to the skin.
Do not use the appliance if the blades of the head A (fig.1) are damaged or
if the blade block is not working correctly.
The appliance can be used without the guide comb G (fig. 1) to cut hair very close
to the skin or to redefine the hairline of the neck and around the ears.
Use without the removable skeleton for better line of sight, easier cleaning and
cooler blade operation:
1. Remove the top two screws (closest to the blade) from the rear casing (left
and right screws).
2. Slide out the drop-down top of the front casing for the skeleton option.
3. Alternative slides or shaft protectors.
4. Reassemble the rear housing screws and tighten the screws back into the
rear housing.
5. Before using the appliance, check that it is working properly.
Replacing the coloured cover
1. Unhook the upper cover of the device by unscrewing the four screws behind the unit.
2. Make sure that all the screws are removed.
3. Gently remove the top cover without using tools.
4. Assemble the new cover.
5. Tighten the screws on the back of the housing.
6. Before using the appliance, check that it is working properly.
7
Publicidad
