ENG
Lubrication
It is recommended to lubricate the blade unit daily or after every use.
To ensure that the cutting blade remains sharp, the cutting head must
be lubricated. It is recommended to regularly apply two to three drops of
lubricant I (fig. 1) directly on the blade (fig. 3).
If after a long period of use, and despite constant cleaning and oiling, the
cutting performance decreases, the head must be replaced.
If, after a long period of use and even after constant cleaning and greasing, the
machine cuts less than normal, the cutting head must be replaced. Contact with
your supplier.
DISPOSAL
The product packaging is made of recyclable materials. Separate the
parts according to their type and dispose of them in accordance with
applicable laws on the environmental protection.
Disposing of the battery and power adapter.
• Turn off the appliance.
• Remove the battery from its compartment.
Do not dispose of the batteries and/or power adapter with normal domestic
waste.
This appliance contains LI-PO (Lithium) type rechargeable batteries. The
end user is responsible for disposing of the batteries at a special waste
collection centre.
LI-PO
The batteries and power adapters are collected free of charge at collection points set
up by your local council or by any battery retailer. By doing this, you not only comply
with the law, but also help protect our environment.
ATTENTION! Do not reconnect the appliance to the power supply once
the batteries have been removed.
9