Descargar Imprimir esta página

KERN OBN 132 Instrucciones De Uso página 45

Microscopio de laboratorio

Publicidad

1 Before use
1.1 General notes
You must open the packaging carefully, to make sure that none of the accessories in
the packaging fall on the floor and get broken.
You should also avoid getting dirt or finger prints in the area of the camera sensor,
because in most cases this will reduce image clarity.
The sensors and electronics inside the camera are extremely sensitive to light. For
this reason never leave the camera in direct sunlight for long periods of time.
Where possible the tablet should not be used in humid environments. Using it in an
environment which is always dry will automatically increase the service life.
1.2 Storage
You should ensure that the device is not exposed to direct sunlight, temperatures
which are too high or too low, vibrations, dust or a high level of humidity.
The ideal temperature range is between 0 and 40°C and a relative humidity of 85%
should not be exceeded.
Sudden temperature fluctuations may cause fog inside the tablet. The tablet should
therefore be stored in a bag or have a protective sleeve to protect it from these
fluctuations.
ODC-2-BA-e-2211
3

Publicidad

loading

Este manual también es adecuado para:

Obn 135