Top Panel - Power Dynamics PDC09 Manual De Instrucciones

TOP PANEL

1. Play/Pause
Each time you press the
"PLAY/PAUSE"-button, the operation
changes from play to pause or from
pause to play.
2. CUE
For return to the beginning of the title
or a CUE point defined before (the unit
is in pause mode). When keeping the
button pressed in pause mode, the title
is momentarily played. As soon as you
release the button the unit instantly
returns to the CUE point.
3. CUP
As long as this button is pressed the
deck will return to the last set CUE
point and the stop. When the button is
released, playback will start.
4. Loop
Set an automatic loop with the
adjusted loop length, without having to
manually set the ending point.
5. Search
To search within a playing track, press
the "SEARCH"-button and turn the
jogwheel clockwise to fast forward and
counter-clockwise to rewind.
6. Scratch
Pressing the "SCRATCH"-button
engages the unit in scratch mode. The
jogwheeel is used to simulate the
effect of scratching a record.
7. Pitch control slide
Set the speed. Slide the control up to
decrease the pitch, slide it down to
increase it. The pitch percentage is
indicated in the display.
8. Pitch Bend – and +
The function "PITCH BEND" created a temporary change of speed. As long as the buttons are pressed, the title is
played slower or faster.
9. Master tempo
For constant pitch when the speed has been changed with the pitch slide control.
10. Sync
To synchronize the beats per minute to the other deck.
11. Loop – and +
Set the length of loop to exactly 1,2,4,8,16 or 32 beats.
12. Effect on
Switches the selected effect on and off. With the effect activated, the LED will light up.
13. FX Time
Adjust the time parameter by turning the control.
14. FX Select
Adjust the effect by pressing the control button to apply to the engaged deck.
15. Level/Depth
Adjust the quantitative parameter of effect's by turning the Level/Depth control.
16. Jogwheel
Jogwheel for pitch bend, scratch effects and precise selection of CUE and loop points.
17. Gain
Adjust the input implication.
18. Filter
Applies the filter effect for the respective channel. The original sound is output when the control is at the centre
position. Turn counter-clockwise to gradually decrease the low-pass filter's cut off the frequency, turn clockwise to
gradually increase the high-pass filter's cut off frequency.
19. 3-Band equalizer
These knobs allow you to adjust the low, mid and high frequency of audio playing on the desired channel of the mixer.
20. Load A/B
To load the title selected in the browser section into Deck A/B
21. List
Turn the encoder to browse folders and titles in the browser section. Press the encoder to select a folder and access
titles.
22. CUE Mix
4