ARIETE 1998 Manual Del Usuario página 13

OPERATING INSTRUCTIONS
- Place an cookware suitable for induction cooking on the glass plate.
- Connect the power plug to a safe and secure power source. The appliance will emit a "beep"
sound, the indicator light under the ON/OFF button will start blinking and the LED display will show
"Lo" to indicate that the appliance is connected to a power source.
ON/OFF button
Place a cookware at the centre of the heating zone. Press the ON/OFF button once, the LED display
will show "ON" and the indicator under the ON/OFF button will stay on. Press to FUNCTION button
to start operation.
To stop the operation and go to the standby mode, press the ON/OFF button after cooking.
FUNCTION BUTTON (temperature/power functions)
Power:
- Press the FUNCTION button, the indicator light of the ON/OFF button and the power one will go
on. The left plate display will show "1200" indicating a default power of 1200 W, the right plate
display will show "1000" indicating a default power of 1000 W.
Power can be adjusted via the DECRESE/INCREASE button: there are 6 power levels available
for the left plate (500, 800, 1200, 1500, 1800, 2000 W) and 6 power levels for the right plate (500,
800, 1000, 1200, 1300, 1500 W).
- To cancel this adjustment, press the FUNCTION button to enter other cooking modes or the ON/
OFF button to stop operation.
- Pressing the MAX button, the appliance goes quickly to 2000 W (left plate) or 1500 W (right plate).
Pressing the MIN button, the appliance goes quickly to 500 W. At the max power, the appliance
does not react when the INCREASE button is pressed. At the min power, the appliance will not
react by pressing the DECREASE button.
Temperature:
- Press the FUNCTION button again, the indicator light of the ON/OFF button and the temperature
one will go on. The display will show "240" indicating a default temperature of 240°C.
The temperature can be set by pressing the DECREASE/INCREASE buttons: there are 10 tem-
perature levels available (60, 80, 100, 120, 140, 160, 180, 200, 220, 240°C).
- To cancel this adjustment, press the FUNCTION button to enter other cooking modes or the ON/
OFF button to stop operation.
- By pressing the MAX or MIN button, the appliance can go from 240°C to 60°C quickly. At the max
temperature, the appliance does not react when the INCREASE button is pressed. At the min
temperature, the appliance will not react by pressing the DECREASE button.
KEEP WARM BUTTON
Pressing the KEEP WARM button, the "Keep Warm" indicator light will go on and the display will
show "80" indicating a default temperature of "80°C".
Nots: this function cannot be set. The default time of the KEEP WARM function is 2 hours.
- 11 -
EN