cecotec ENERGYSILENCE 3500 COOL COMPACT SMART Manual De Instrucciones página 34

ENGLISH
4. Mode icon
Press the mode icon
follows:
- Natural mode: press the mode icon until "AL" appears. The setting will be saved when the
display stops flashing.
- Sleep mode: press the mode icon until "SP" appears. The setting will be saved when the
display stops flashing.
5. Cold function icon
- Press this icon
- Make sure that the water level in the tank exceeds the "MIN" mark.
- As soon as you press the icon, the appliance will start to blow out cold, moist air.
6. Oscillation icon
- Press this icon
will light up on the control panel.
- Press the oscillation icon again to deactivate this function.
ATTENTION: this function will cause the cooler to blow air to the right and left. This allows a
horizontal distribution of air in the room.
Remote control
Fig. 4
1. Speed button
2. Mode button
3. Power button
4. Timer button
5. Cold function button
6. Oscillation button
- The remote control of this cooler contains the same functions as the control panel.
- The batteries for the remote control are not included. They are AAA type.
Remote control operation
Point the remote control directly at the front of the appliance, making sure that there are no
obstacles between the remote control and the appliance.
ATTENTION:
- Hold the remote control carefully.
- Do not expose to direct sunlight and keep away from heat sources.
34
ENERGYSILENCE 3500 COOL COMPACT SMART
to select the desired mode. The available modes of this cooler are as
to activate the cold function.
to activate the oscillation function. The corresponding indicator light