Be Cool BC29TFRC Instrucciones De Uso página 135

ASSEMBLY
Join the two components of the stand together
while pulling the cable through the middle.
Then press the two parts into each other,
making sure that they click into place.
Place the stand on the fan housing and carefully pull
the power cable through the opening in the stand.
Basic installation
Step 1: Unscrew the lock nut from the fan housing
counterclockwise.
Step 2: Feed the mains cable through the centre hole
of the two semi-circular bases.
Step 3: Insert the fan housing into the middle hole of
the two semicircular bases and then press these two
semicircular bases together; make sure that the 4
holes between these two semicircles are tightly
closed.
Step 4: Attach the base to the fan housing; insert the
locking nut and turn it clockwise to lock the base in
position.
Page 135 from 139