Publicidad
Idiomas disponibles
Idiomas disponibles
1_
I
Briggs & Stratton P ower P roducts Automatic Transfer Switch
Installation
and Owner's
Manual
Equipment
Description
These new generation transfer switches are intended to
operate compatible electrical
loads of normal residential
installations.The
load is connected either to utility power
(normal) or home standby power (emergency).The
transfer
switch monitors
utility and generator
voltages and will
automatically
connect to the appropriate
source of power.
Major components
of the transfer switch are 2 pole
contactor
switches, control
circuit board, fused utility
terminals and interconnecting
wiring.
The transfer switch is coil-operated
from utility or
generator
inputs and contains suitable electrical
interlock
switches to eliminate the possibility of connecting the
utility service to the generator
output. It has ratings
capable of switching generator
power into the residence.
The control module circuit board has active circuits sensing
utility and generator voltages. It creates a signal for the
generator start-up, switch transfer, retransfer when utility is
restored and generator cool down periods.The
control
board also contains red and green lights indicating the power
sources available.
INSTALLATION
Unpacking
Delivery
Inspection
After removing the carton, carefully inspect the transfer
switch components
for any damage that may have occurred
during shipment.
IMPORTANT:
If loss or damage is noted at time of
delivery, have the person(s) making delivery note all damage
on the freight bill and affix his signature under the
consignor's memo of loss or damage. If loss or damage is
noted after delivery, contact the carrier for claim
procedures. Freight damaged parts are not warranted.
Shipment
Contents
• Automatic
Power Transfer Switch
• Installation and Owner's
Manual
Mounting
Dimensions
Figure I depicts the physical size and mounting hole
locations of the automatic transfer switch enclosure.The
enclosure for model 01917 is suitable for indoor use ONLY.
The enclosure for model 01918 is suitable for
indoor/outdoor
use.
®
®
Enclosure
Dimensions
Mounting
Dimensions
Model 01917
Enclosure
Dimensions
Mounting
Dimensions
Model 01918
The transfer switch enclosure is commonly
secured
through the predrilled
holes, as shown.
Publicidad
