Q-Connect Q12 JAM FREE Manual De Instrucciones página 2

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
USER MAnUAl FoR tHE Q12 JAM FREE
Q-ConnECtSHREDDER
IMPoRtAnt!
READ All InStRUCtIonS BEFoRE USInG
WARnInG
Do not insert fingers into the shredder and avoid
touching the feed opening with your hands.
Do not let children use or play near the shredder, keep
unplugged when not in use.
Do not insert any object into the shredder opening
other than the material to be shredded.
Do not spray ANY aerosol products on or in the vicin-
ity of the shredder as this might lead to combustion,
do not shred any materials which may have come into
contact with any combustible chemicals.
Avoid loose clothing like ties or jewellery touching the
shredder as they might be drawn into the shredder.
Avoid hair dangling over or touching the shredder as it
might be drawn into the shredder.
Always turn the shredder off and unplug the power cord from
the AC outlet when not in use, before cleaning it, moving it, or
emptying the waste basket.
RISK OF FIRE. Never use any petroleum based or flammable oils
or lubricants in or around the machine as some oils can combust
causing serious injury.
ONLY USE NON-AEROLSOL VEGETABLE BASED OILS TO OIL YOUR
CUTTERS.
NEVER dispose of flammable chemicals or materials that have
come into contact with flammable chemicals (for example, nail
polish, acetone, gasoline) in the shredder basket.
Never shred large paper clips, envelopes (any window, insulated,
or with glued flaps), adhesive materials (labels, decals/stickers,
glued paper), newsprint, transparencies, laminated documents,
continuous forms, cardboard, or hard and plastic materials (ex-
cept Credit Cards).
Do not activate reverse function while shredding credit cards.
A socket-outlet should be near the equipment and be easily ac-
cessible.
Always turn the shredder off and unplug the power cord from
the AC outlet before cleaning it, moving it, or emptying the
waste basket.
Never let the wastebasket become full. This will lead to shred-
ded material being pulled back up into the shredder and cause
jams.
Never place the shredder near water or any heat source.
Keep wastebasket emptied so that the shredder output is not
impeded.
Do not use the shredder if the power cord is damaged in any
way.
2
Do not attempt to service this product yourself as doing so may
expose you to sharp cutting blades and/or electricity and will
void the manufacturer's warranty.
Never try to clean or clear the shredder blade.
Never shred beyond the specified sheet capacity. May result in
extensive damage to the machine.
ONE FOLDED SHEET OF PAPER EQUATES TO 2 SHEETS OF
PAPER
Heavier paper, humidity or other than rated voltage may reduce
shredding capacity.
InStAllAtIon
1. Make sure the basket door is securely closed shut. This shred-
der features a safety power cut off and will not operate if door
is open. Shredders with pull-out wastebaskets feature a safety
power cut off upon bin removal. The supplied wastebasket acti-
vates this switch, which allows the shredder to be operable.
2. Attach all 4 caster wheels to the bottom of the wastebasket.
3. A socket-outlet should be near the equipment and be easily ac-
cessible.
C AUtIon !
Crosscut shredders have very sharp exposed blades on the under-
side. Use care when mounting the shredder on the wastebasket.
oPERAtIon
1) ContRol SWItCH
Using the switch located on the unit,
select one of the following settings
by sliding the switch either left or
right.
t
W W W . Q - C O N N E C T . C O M

Publicidad

Tabla de contenido
loading

Tabla de contenido