Publicidad
Idiomas disponibles
Idiomas disponibles
to be cut.
• To achieve a good result with curly, sparse or long hair, use a comb to guide the hair
towards the appliance.
5. Regularly remove cut hair from the comb. If a lot of hair has accumulated in the comb,
remove the comb from the appliance and blow and/or shake the hair out of it.
CONTOURING WITHOUT HAIR CLIPPING COMB
You can use the appliance without hair clipping comb to clip hair very close to the skin
(0.6mm) or to contour the neckline and the area round the ears.
Be careful when you clip without comb because the cutting element removes every hair
it touches.
1. Press the setting selector upwards and pull the comb off the trim parts. (Fig. 12)
2. Before you start to contour the hairline round the ears, comb the hair ends over the ears.
3. Tilt the appliance in such a way that only one edge of the cutting element touches the
hair ends when you shape the contours round the ears. (Fig. 13)
4. Only cut the hair ends. The hairline should be close to the ear.
5. To contour the neckline and sideburns, turn the appliance and make downward strokes.
(Fig. 14).
6. Move the appliance slowly and smoothly. Follow the natural hairline.
CREATE FINE LINES AND CONTOURS
Use the Cutting element without a guard to create fine lines and contours around your
facial style, close to the skin to a length of 0.5mm. (figs. 15 and 16).
Hold the precision trimming head upwards or downwards with gentle pressure to create
fine lines and contours around your facial style.
4. CLEANING
• Do not use water or a moist cloth to clean the handle. Never use compressed air,
scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone
to clean the appliance.
• Cutting element, precision trimmer and Lettering head use some lubricating oil, the
result is better.
Note: Clean the appliance every time you have used it.
1. Make sure the appliance is switched off and disconnected from the socket.
2. Remove any comb and attachment from the appliance.
3. Blow and/or shake out any hair that has accumulated in the attachments and/or combs.
4. Clean the attachments and the combs with lukewarm water or with the cleaning brush.
5. Clean the USB line with the cleaning brush or a dry cloth.
Publicidad
