CANGAROO CARA Instrucciones De Uso página 12

Basic part of the breast pump
4. Fastening cover
5. Silicone cylinder
6. Carry ring
7. Handle
8. Valve
9. Breastmilk bottle (150ml)
Make sure that you have cleaned well and sterilized all the parts of the manual breast pump before starting
its assembly. Wash your hands thoroughly! Follow exactly the instructions and sequence for assembling the
product, described in the text and images hereafter attached.
1.Step 1: Attach to the carry ring the silicone cylinder. Be careful not to tear or scratch the cylinder as this will
affect the pumping vacuum. Put the silicone cylinder into the upper part of the pump body.
2.Step 2: Press with fingers the top part of the cylinder to the upper part of the pump body to fix it well. It
should fits tightly to the pump body. .
3.Step 3: Attach the pump handle to the ring.
4. Step 4: Put the cover over the cylinder and handle.
5. Step 5: Attach the silicone massage pad to the pump body, as shown in figure 5.
6. Step 6: Gently push its inner end as further as possible and make sure that it fits ideally to all sides of the
pump body.
7. Step 7: Fix the breastmilk bottle to the pump body so that the thread of the bottle coincides exactly with the
thread of the bottom part of the pump connector.
8. Step 8:The breast pump is ready for use. On Figure 8 is shown the right way to hold the breast pump when
using it.
9. Step 9: Put the protective cover if you will not be using the pump.
A. WHEN YOU CAN USE THE BREAST PUMP:
1.If it is possible.
•Only if you have sufficient milk secretion and normal time for breastfeeding.
•The use of the breast pump may begin usually two or four weeks after the birth of Your baby until you set a
graphic of expressing the breast milk and the breastfeeding. Unless if Your doctor/ health advisor hasn't
recommended you another way of expressing your breast milk.
2. In the following cases You can always use Your breast pump:
•If you have more breast milk, you can express some of it between meals in order to reduce the pain of the
bulging breasts, and this way it is easier for the baby to suck.
•If your nipples pain or are cracking, you can express some milk for feeding until the nipples get back.
•If you need to separate from your baby and hope to continue breastfeeding after reunion, breast milk can be
expressed periodically to maintain milk secretion.
B. HINTS:
1.It takes practice in order to use the breast pump the best way possible. So, it will take you at least several
attempts before starting successfully to use the manual breast pump.
2.Choose a quiet time to use the pump – time, when no one will disturb you. If you are working again , it may
be needed to express in the breaks.
3.You should find the optimal expressions for the day, for instance right before and after the first
breastfeeding in the morning, when Your breasts are full or after breastfeeding, when the baby hasn't taken all
from both of Your breasts.
4.The picture of Your child may help to stimulate the expression of the milk.
Material of which is made the part
РР
Silicone
РР
ABS
PP
PP
III. ASSEMBLY OF THE MANUAL BREAST PUMP
IV. METHOD OF USE
Temperature resistance
120˚C
200˚C
120˚C
80˚C
120˚C
120˚C
Cold resistance
-20˚C
-20˚C
-20˚C
-20˚C
-20˚C
-20˚C
11