neno Primo Manual Del Usuario página 16

Step 2 - Soak in warm, soapy water for 5 minutes, then wash and rinse
Step 3 - Let the parts air dry. Store dry device parts in a cool and dry place when
you're not using them.
2. Sterilization of the breast pump components (before first use and after use):
SEE FIG. F
Step 1 - Fill the pot with enough water to cover all parts of the disassembled ap-
pliance. Bring the water to a boil before you put the unfolded breast pump inside.
Step 2 - Place the parts of the device in boiling water for 10 minutes.
Step 3 - Let the parts air dry. Store dry device parts in a cool and dry place when
you're not using them.
3. Cleaning the pumping device:
SSEE FIG. G
Prepare:
-mild soap or other cleaning agent,
-clean dish towel.
Parts that need to be cleaned:
-pumping device.
WARNING:
- Do not submerge the pumping device in water.
- Do not rinse the pumping device with water.
- When cleaning the display of the pumping device, use only a damp, soft cloth
with a mild soap or cleaner. Stronger cleaning products or abrasive materials can
destroy the display.
14. SPECIFICATION
Output power: 110-240V 50-60Hz | Input power: 5V 1A | Weight: 357 g | Dimen-
sions: 84x64x63 mm | Battery capacity and type: 3.7V 1400 mAh Li-Ion
15. WARRANTY CARD/ COMPLAINTS
The product is covered by a 24-month warranty.
The terms of the guarantee can be found at: https://neno.pl/gwarancja
Details, contact and website address can be found at: https://neno.pl/kontakt
Specifications and contents of the kit are subject to change without notice. We
apologise for any inconvenience.
DE
BEDIENUNGSANLEITUNG
16