Publicidad
Idiomas disponibles
Idiomas disponibles
EN
To use the defrost function
1. Press the mode button
is shown. The defrost mode is now activated.
2. Under Defrost mode, the appliance will start to
heat and melt ice thus prevent the auger from
being stuck.
Waning: Only when the inside temperature
is less or equal to 0°C, defrost function
can be activated. When the temperature
rises up to 4°C, defrost function will stop
automatically and the appliance will turn to
Juice mode.
To adjust the light colour
1. Press the light button
2. Press the light button
light starts to flash.
3. Press buttons
desired light colour. There are 0~63 colour
options and '0' means light off.
To empty the bowl
Note:
•
The bowl must be cleaned and sanitized
at least once a day and more frequently
depending on the products used, and
in any case, in compliance with the
applicable hygiene regulations.
•
If the appliance is not used continuously
throughout the day, wipe the dispensing
tap area and the product outlet area
with a clean cloth and sanitizing fluid.
1. Before a bowl is cleaned, it must be emptied.
2. Set the bowl to the simple cleaning mode.
Then release all the stuff from the bowl into a
suitable container.
3. Switch off and unplug the appliance.
8
UA044_UA045_UA046_ML_A5_v1_20240112.indb 8
UA044_UA045_UA046_ML_A5_v1_20240112.indb 8
until the icon 'DEF'
to turn the light on.
for 3 seconds. The
and
to select the
To turn off the appliance
After use: Press the on/off switch
•
off the appliance.
•
In case of freezing, switch off and unplug the
appliance. Then call POLAR agent or qualified
technician.
•
Should a fire break out, clear the area
immediately to make way for the trained
personnel for proper handling.
Cleaning, Care &
Maintenance
Warning:
Switch off and disconnect from the
power supply before any cleaning and
maintenance.
Ensure to clean and maintain the appliance
in time and thoroughly, or bacterial
breeding and build-up of germs may occur.
•
Before cleaning or maintenance, ensure to
wear proper personal protections (gloves,
glasses, etc.)
•
Do not use abrasive cleaning agents as they
may leave harmful residues.
•
DO NOT rinse the base unit. Instead just wipe
the outer surface with a damp cloth.
•
Empty and clean the drip trays regularly.
•
DO NOT wash any parts in a dishwasher.
•
DO NOT dry any parts in a conventional or
microwave oven.
•
Ensure to carry out any cleaning and
sanitization with utmost care and on a regular
basis to guarantee the quality of the product
dispensed and compliance with mandatory
hygiene standards.
•
When all cleaning and maintenance completed,
make sure that all protective covers and guards
that have been removed or opened are set
back in place and secured properly.
•
For easy cleaning and maintenance, the upper
parts of the side protectors can be removed.
When necessary, lift the upper part to remove.
Once done with cleaning, re-locate the part in
place.
to turn
2024/1/12 10:10
2024/1/12 10:10
Publicidad
