Surewerx JACKSON AIRMAX+ Manual De Instrucciones página 2

AIRMAX+ PAPR SYSTEM WITH SOFT HOOD
e
User Instructions
For your protection and maximum efficiency, please read this information carefully before use.
IMPORTANT
Airmax+ Soft Hoods may only be used in conjunction with genuine Airmax+ labelled products and
offer no respiratory protection if used without a fully assembled and operational Airmax+ PAPR.
This product is designed to protect your health and wellbeing. Failure to comply with these
user instructions may adversely affect your health/wellbeing leading to illness or even death.
Do not use a faulty, torn or incomplete product. Unauthorized modification/maintenance/
repair work may adversely affect the protection level of the product and may adversely affect
your health/wellbeing leading to illness or even death.
If your product is faulty, please contact the manufacturer.
Please retain this manual with the product for future reference.
WARNING: If any of the conditions outlined in this user instruction manual are not kept or followed your
health and safety may be a risk.
COMPONENTS
The Soft Hoods are a TH3, impact resistant, loose-fitting hood top accessory for the Airmax+ PAPR system
and requires a fully assembled and working unit to function.
The Airmax+ system circulates clean pressured air around a loose-fitting hood. The belt-mounted blower
unit delivers air through a filter, via a hose, into the hooded headpiece. The constant supply of filtered air
creates positive pressure inside the headpiece, which prevents external contaminated air from entering the
user's breathing zone.
A protective film is applied to the visor during the manufacturing process to protect the visor from scratches.
Remove before use.
For further information, please refer to the Airmax+ user instructions.
Putting on/
Taking off Loop
Visor
Double-layer Cape
RANGE OF APPLICATIONS
When used as part of a fully assembled and working Airmax+ system, the Soft Hoods offers TH3 P R SL
protection with a Nominal Protection Factor (NPF) of 50.
No recommendation is given by the manufacturer as to the suitability of this product for your specific needs.
Suitability of this product should be guided by organisation, local and national guidelines pertaining to
Respiratory Protective Equipment (RPE) and Powered Air Purifying Respirators (PAPRs).
Air Intake Connection Hole
Hood Circumference Adjuster Hole
Loose-fitting Neck Seal
2