Qilive Q.6379 Manual De Instrucciones página 13

3. Dismantle the upper hinge cover, screws and upper hinge, and remove the hole cover from
the other side, unplug the wiring connector on the right side of refrigerator top (
connector).
4. Dismantle the door and right bottom hinge assembly (hinge shaft&adjustable foot&hinge),
disassemble the right bottom hinge assembly,and assemble the hinge shaft and adjustable
foot on the other side of hinge, then assemble the whole hinge assembly on the other side of
refrigerator.
5. Remove the door upper cover, install the upper hinge sleeve , door signal line to the other side
and install the door upper cover.
Dismantle the right door stopper,sleeve pipe from the right bottom of door, insert the sleeve
pipe into hinge hole of left bottom of door, and take out left door stopper from the accessory
bag, and assemble it on left bottom of door, the right door stopper could be reserved for future
use.
sleeve pipe
stopper
stopper screw
6. Take out of the left top hinge,left top hinge cover from accessories package;
Place the door on bottom hinge ,and mount left top hinge.
Dismantle the pillar switch from the hinge cover assembly ,and palce on the left upper hinge
cover;
Connect signal line terminal
door switch connect signal line terminal
and hole cover.
hole cover
hinge cover
door signal line
door upper cover
with signal line terminal
with signal line terminal
13
, ,
hinge shaft
adjustable foot
sleeve pipe
,connect signal line terminal
; Mount top hinge cover
EN
wiring
to the