Descargar Imprimir esta página

GIA HTW-AT-V100MR290A Manual De Usuario E Instalacion página 81

Acumuladores aerotérmicos

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

4.Press these buttons when the unit is on timer setting status, the hour(s) and the minute(s) of
the timer 'ON'/'OFF' can be adjusted.
5.Press
and
6.Press
and
unlocked.
button
4)
Clock setting:
1. After power on, short press
icons "88:88" flash together;
2.Short press
exact hour(s) and minute(s);
3.Press
button again to confirm and exit.
Timer setting:
4.After power on, long press
timer with icon
and hour icon "88:" flash together;
5.Press the
and
6.Press
button to transfer to minute setting, minute icon ":88" flash, press the
buttons to set the exact minute(s).
7.Press
button again to transfer to timer off setting, the timer off icon
"88:" flash together.
8.Press the
and
9.Press
button to transfer to minute setting, minute icon ":88" flash, press the
buttons to set the exact minute(s).
10.Press
button again to save and exit the timer setting interface.
Press
button to cancel the timer settings during the timer 'ON' (or timer 'OFF') programming.
NOTE:
1.The timer 'ON' and timer 'OFF' functions can be set at the same time.
2.The timer settings are repeating.
3.The timer settings are still valid after a sudden power cut.
button
5) .
When the heat pump is ON, press this button to turn 'ON' the electrical heater. The heater icon
will be showed, and the electrical heater will work according to the control program.
When the heat pump is ON, press this button and hold for 5 seconds to enable or disable the
fan ventilation function.
When the heat pump is OFF, press this button to enter E-heater mode.
button
6)
Check the temperatures and EXV open steps
1)
-Press this button to enter temp and EXV open step checking.
buttons at the same time and hold for 5 seconds, the buttons are locked.
buttons at the same time and hold for 5 seconds again, the buttons are
button to entry the clock setting interface, hour and minute
button to switch hour/minute setting, press the
button for 5 seconds to enter the timer setting interface, the
buttons to set the exact hour(s).
buttons to set the exact hour(s).
27
and
buttons to set the
and
and hour icon
and

Publicidad

loading

Productos relacionados para GIA HTW-AT-V100MR290A

Este manual también es adecuado para:

Htw-at-v160mr290aHtw-at-v200mr290aHtw-at-v300mr290a