Publicidad
Idiomas disponibles
Idiomas disponibles
This icon shows the heat pump is under defrosting.
Heating
5)
This icon shows the heat pump is working.
Key lock
6)
This icon indicates the key lock function is enabled. The keys cannot be operated until this
function is disabled.
Water temperature display on left part of the screen
7)
The display shows the setting water temperature.
When checking or adjusting the parameters, this section will display the relating parameter
number.
Water temperature display on right part of the screen
8)
The display shows the current downside temperature of the water tank.
When checking or adjusting the parameters, this section will display the related parameter
value.
In case any malfunction occurs, this section will display the related error code.
Time display
9)
The display shows the clock or timer.
Timer 'ON'
10)
The icon indicates that the timer 'ON' function is enabled.
Timer 'OFF'
11)
The icon indicates that the timer 'OFF' function is enabled.
Error
12)
The icon indicates there is malfunction.
WIFI
13)
The icon indicates that WiFi is connected.
Extra PV control function:
Add PV switch in the main control board.
When the parameter 17 is set as 0: It is in manual setting status, users can directly operate
the and
button of the wire controller to change the set temperature;
When the parameter 17 set as 1: it is auto setting status, the target temperature will be set
automatically according to the parameters of 18/19 and the status of PV Switch. Direct
manipulation with + / - keys do not change the set temperature, but will response to the operation
action by sound;
When the PV Switch is closed, the target temperature will be directly changed to the set value of
parameter 18. When the PV Switch is disconnected, the target temperature will be directly changed
to the set value of parameter 19.
29
Publicidad
