Publicidad
Idiomas disponibles
Idiomas disponibles
4. ASSEMBLY
4.1. ASSEMBLING THE CHARGING STATION
The charging station consists of a base, a support and a battery charger. The battery charger is
permanently connected to the base.
1.
Attach the support to the base by pushing the bottom of it into the base until it clicks into place.
2.
Place the assembled charging station on a flat and stable surface near an electrical socket.
4.2. ASSEMBLING THE MAIN UNIT
1.
Align the arrow symbol on the dust container with the unlocked symbol on the main body and
push the dust container onto the main body. Then turn the dust container anticlockwise until
the arrow symbol points to the locked symbol on the main body.
2.
Align the release button on the suction nozzle with the locking recess on the dust container.
Then push the suction nozzle onto the dust container until it clicks into place.
4.3. ATTACHING THE CREVICE OR DUSTING NOZZLE (FIGURE 1)
CAUTION: Risk of injury! Never hold the crevice nozzle close to the body, or it may stick to the
skin. If the nozzle does get stuck, switch off the appliance immediately.
You can attach the crevice or dusting nozzle directly to the main unit and use the appliance as a
handheld vacuum cleaner. The crevice nozzles make it easy to clean tables, car interiors or hard-
to-reach corners. The dusting nozzle is designed to clean sofas, carpets and the l ke.
•
To attach the nozzle, push the nozzle connector into the suction nozzle as far as it will go.
•
To detach the nozzle, pull the nozzle out of the suction nozzle.
4.4. ATTACHING THE FLOOR NOZZLE (FIGURE 2)
You can attach the floor nozzle to the main unit using the extension tubes and use the appliance
as a handheld vacuum cleaner to clean the floor.
1.
Connect the two extension tubes together by inserting the smaller end of one tube into the
bigger end of the other tube.
2.
Insert the smaller end of the assembled tube into the floor nozzle connector.
3.
Insert the extension tube adapter into the other end of the assembled tube.
4.
Push the extension tube adapter into the suction nozzle as far as it will go.
10
11
1
2
9
9
3
2
EN
Publicidad
