Dell EMC DR4300e Manual De Instrucciones página 20

Especificaciones de la unidad
Hard drives
The Dell DR4300e system supports up to twelve 3.5-inch hard drives and two optional 2.5-inch back-accessible SAS, SATA, or Nearline
SAS hard drives.
Especificaciones de puertos y conectores
USB ports
The Dell DR4300e system supports:
• USB 2.0-compliant ports on the front panel
• USB 3.0-complaint ports on the back panel
• internal USB 3.0-compliant port
The following table provides more information about the USB specifications:
Table 16. USB specifications
System
Dell DR4300e system
NIC ports
The Dell DR4300e system supports four Network Interface Controller (NIC) ports on the back panel, which is available in one of the
following three NIC configurations:
• Four 1 Gbps
• Two 1 Gbps and two 10 Gbps
• Four 10 Gbps
Serial connector
The serial connector connects a serial device to the system. The Dell DR4300e system supports one serial connector on the back panel,
which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-compliant.
VGA ports
The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The Dell DR4300e system supports two 15-pin
VGA ports on the front and back panels.
Internal Dual SD Module
The Dell DR4300e system supports two optional flash memory card slots with an internal dual SD module.
NOTE: One card slot is dedicated for redundancy.
Video specifications
The Dell DR4300e system supports Matrox G200eR2 graphics card with 16 MB capacity.
20 Especificaciones técnicas
Front panel
One USB management port/
iDRAC Direct
Back panel
Two 9-pin, USB 3.0-compliant
ports
Internal
One 9-pin, USB 3.0-compliant
port