Steren COM-598 Manual De Instrucciones página 49

1. Add prefix
Scan the following code (remove the previous parameters)
Scan the required character codes (maximum 10 characters). Example:
To add the prefix "MG" scan the character "M" and "G"
The MG prefix will now be added when scanning a bar code
Use the test barcode (TEST), the MGTEST message will appear.
2. Add Suffix
Scan the following code (remove the previous parameters)
Scan the required character codes (maximum 10 characters). Example:
To add the suffix "OK" scan the character "O" and "K"
The OK suffix will now be added when scanning a bar code
Use the test barcode (TEST), the TEST OK message will appear.
Agregar prefijo
Add suffix
18